VISTEN Atomatik Flexo Babban Gudun bugu & slott & manne a layi

Fitar Flexo ta atomatik & Slotter & Die cutter Machine na VISTEN

Tsarin aiki da sigogi na fasaha.

I. Na'urar sarrafa aikin kwamfuta

1.Memory zuwa sifili: injin goge nau'in ko ƙaramin adadin farantin yana canzawa a cikin aikin aikin su don buɗe na'ura, bayan rufe injin na iya dawo da matsayin asali ta atomatik.

2.Controlled anilox abin nadi daga: a lokacin da wani rukuni na wucin gadi ba ya bukatar bugu, iya sarrafa kungiyar anilox yi da bukatar ƙi, kuma ta haka ne ba bukatar tsaftace tawada nadi.

3.Automatically trimming takarda: da yardar kaina saita lokacin datsa takarda tazara don sanya aikin ya zama mai sassauƙa, dacewa da halaye na mutum ɗaya.

4.Position zuwa sifili: injin na iya sanya matsayi na farantin zuwa sifili domin wurin da farantin zai iya zama wuri, gwajin da aka buga kwali biyu na iya bincika wurin daidai.

5.Babban nunin allo na mota, ciyarwa, datsa, tsallakewa.

6.Allon nunin adadin umarni kuma saita adadin ainihin samarwa, kuma injin na iya tsayawa ta atomatik bayan kammala bugu, anilox ta atomatik nesa da farantin.

7.Orders tsoho: zaka iya buƙata don sarrafa oda akan allon launi na kwamfuta kawai kuna buƙatar shigar da tsayin kwali, faɗi, tsayi da faɗin kusurwa, datsa nisa na kowane bayanan bayanan sirri na biyar don kammala homing mafi kusa;(zai iya adana oda 999).

Bayanai sun ƙunshi:

(1) Matsayin bugu na kowane launi.

(2) Matsayin Slotter.

(3) Akwatin babban matsayi.

(4) Faɗin gaban kwali, faɗin gefe.

(5) Tsawon kwali, fadinsa da sauransu

Homing mafi kusa kai tsaye bayan shigar da shigarwar kai tsaye ba tare da mai watsa shiri na farko ya sanya hanya ɗaya zuwa sifili da faifan wuƙa, baffle kuma fara komawa zuwa asalin sake saita ƙarancin ingantaccen aiki.

8.Riƙe bayanai: Lokacin da aka sarrafa bayanan daidai samfuran, ana adana bayanan yanzu ta atomatik don amfani na gaba;daidaita ta atomatik daidai da umarnin lokacin da aka sake amfani da shi, yana adana lokacin ƙa'idar tune.

II.Sashen ciyarwa (raka'a ɗaya)

Daidaiton ciyarwa: ± 1mm

1.Machine kama

(1) Injin sarrafa wutar lantarki kama ƙararrawa, tafiya ta ci gaba da ƙara faɗakarwa, don tabbatar da amincin ma'aikatan.

(2) Kowane layi na ƙasa da Taiwan, na'urori na gaggawa na dakatarwa na iya zama iko na ciki don dakatar da motsi na inji, don tabbatar da tsaro na ma'aikatan ayyukan ciki.

(3) Na'urar interlock na pneumatic.

(4) Gaba ɗaya tsarin kullewa.

2.Shaye tsarin kura

(1) An sanye shi da injin cire ƙura mai kyau, adadi mai yawa don kawar da ƙazanta na bugu na kwali, da haɓaka ingancin bugawa.

3.Ciyar da abin nadi

Diamita na waje na abin nadi na ciyarwa shine Φ142.68mm. (1200)

(2) Bututu maras kyau, nannade roba mai sawa, da yin gyaran fuska.

Ƙarƙashin abin nadi na ciyarwa shine Φ157.45mm da ɗorawa mai wuyar chrome plating.(1200)

(4) The feed abin nadi rata da sikelin tsutsotsi gear gyara, da daidaita kewayon 0-12mm

.4.Na biyu saitin nadi na sama da ƙananan abinci

(1) Bututu maras kyau, nannade cikin roba mai jure lalacewa, da yin gyaran fuska.

Ƙananan abin nadi na waje diamita ne Φ157.45mm da kuma embossed wuya chrome plating.(1200)

(3) Ratar abin nadi na ciyarwa daidaita ta mutum, kewayon daidaitawa na 0-12mm.

5.The atomatik ciyar' s sarrafawa iko

(1), ciyar a kusa da bezel, tura kwali bayan toshe katakon lantarki, da aikin gyaran takarda

(2), tsarin ciyarwa na baya na tsotsa, gwargwadon matakin lankwasa kwali, yi daidaita girman iska.(Tsarin ciyarwar jagorar mai sarrafa servo na zaɓi)

(Kamfaninmu yana samar da babban gefen tsarin ciyar da takarda na servo iko, tare da haƙƙin mallaka na ilimi mai zaman kansa, kuma tattalin arzikin yana bayyane sosai, kawai don maye gurbin daidaitaccen bel ɗin lokaci wanda zai iya tabbatar da amfani da mai ba da abinci na yau da kullun tare da bin diddigin aiki tare, maye gurbin abincin abin nadi maras kyau watsawa da sauran sabbin fasalulluka, na iya tabbatar da ingantaccen abinci daidaitaccen abinci, don guje wa koma baya ba za a iya warware shi ta hanyar watsa cam na inji, lalacewa na injiniya da tsagewa bayan amfani da dogon lokaci, rashin jin daɗi na maye gurbin abinci, rashin zaman lafiya mai saurin watsawa da sauran dalilai.)

III.Printer unit(launi daya saiti)(Tsarin gogewa na zaɓi)

Daidaitaccen bugu: ± 0.5mm

1.Printing abin nadi

1) ,!Diamita na waje Φ393.97mm (dauke da diamita na faranti shine Φ393.97mm) （1200）

Diamita na waje Φ443.2mm (dauke da diamita farantin isΦ457.6mm) （1400）

2), niƙa saman, plating mai wuyar chrome.

3), Dynamic da static balance gyara, m aiki.

4), Ratchet kafaffen sigar girma na shaft.

5), Yana ɗaukar tsarin rataye don dacewa da shigarwa cikin sauri, don nau'in rataye na 10mm na labarin

6), loading da sauke farantin bugu, juyawa ƙafar wutar lantarki.

2. Buga embossing abin nadi

1)Diamita na waje na Φ172.2mm.(1200)

2) Karfe bututu surface nika, wuya Chrome plating.

3）,Gyaran ma'auni, aiki mai santsi

4) Scale da hannu daidaita bugu ra'ayi nadi rata daidaita kewayon 0-12mm

3. Karfe anilox abin nadi (ZABI yumbu anilox nadi)

1)Diamita na waje na Φ206.65mm.(1200)

2), The engraving textured karfe surface da na musamman aiki.

3), digo, ko da akan tawada, mai dorewa, kuma mai dorewa.

4), tsawaita lokacin a cikin abin da farantin karfe da robar rayuwa, wanda aka sassaka ta hanyar tsari na musamman.

4, roba

1)Diamita na waje na 外径为Φ211mm.(1200)

2), karfe mai rufi da roba mai jure lalata.

3), musamman niƙa roba abin nadi, tawada sakamako.

5, tsarin daidaita tsarin lokaci

1)Tsarin kayan aiki na duniya.

2) Lokaci na umarnin nuni na dijital don sanya aikin ya fi dacewa, fahimta da daidaito.

3), The bugu lokaci da PLC tabawa iko da lantarki dijital 360 daidaitawa (aiki tasha za a iya gyara).Daidaitaccen daidaita yanayin lokaci har zuwa 0.15 mm.

4) Ana amfani da inverter Printer don daidaita lokaci, tsauri da tsayin daka a ƙarƙashin kowane gyare-gyaren matsayi, daidaitaccen daidaitawa har zuwa 0.10 mm, kamar rarrabuwar wuri koyaushe na iya sake saitawa zuwa sifili bayan an cire naúrar, daidaito har zuwa 0.5 mm.

6. Tawada zagayawa

1), famfo tawada na pneumatic, kwanciyar hankali tawada, aiki mai sauƙi da kulawa.

2), na'urar tsaftace tawada na lardin, wanda zai iya adana tawada yadda ya kamata.

3), tace tawada, tace kazanta.

7, kayan aikin bugu

1), na'urar birki ta lantarki.

8, tsarin daidaita axial

1), injin daidaitawar axial na lantarki.

2).

IV.Ƙungiyar Slotter (saiti ɗaya)

Matsakaicin Slotting: ± 1.5mm

1, dabaran waya

Shaft diamitaΦ154mm, bayan biyu nika, wuya chrome plated, m motsi.(1200)

2), Layin latsa abin nadi rata da sikelin manual gyara, da daidaita kewayon 0-12mm.

3) The matsa lamba line zagaye amfani da ingancin shigo da polyurethane

2.Slot wuka zamiya daidaita inji

1)Diamita na shaft Φ174mm bayan niƙa biyu, mai wuyar chrome plated, motsi mai santsi.(1200)

2) Ramin wuka nisa na 7mm.

3) Alloy kayan aiki karfe zafi-bi, nika toothed slotted wuka, taurin da taurin ne na kwarai.(Taiwan)

4) Alloy karfe bayan zafi magani, nika trimming wuka, kaifi wuka, kuma high daidaici.

5).

6).

Slotted lokaci daidaita tsarin

1), tsarin kayan aikin duniya.

2).

3).

Tsarin Glue VI.

1.Sauƙaƙan kulawa, rage farashin kulawa.

2.Peristaltic famfo tsotsa sake zagayowar, rage manna sharar gida.

Sashin sufuri:

Za a iya jimre da kauri daban-daban na kwali tare da na'urar daidaita rata, ana karɓa daga latsawa daga kwali na tsaye.

Rukunin nadawa:

1.Installation sabon tsarin nadawa, a cikin layi a daidai nadawa, trimming rata na iya zama sama da ƙasa.

2.Using tsotsa nau'in babban bel, da m fitarwa na karshe mataki a cikin nadawa kartani, kwali gefuna don hana murdiya.

3.Hagu da dama biyu ninka bel tare da keɓantaccen motar motsa jiki, bisa ga tsayin tsayi da nisa daidaitattun saurin sarrafawa.

Ƙidaya da Fitar da naúrar

1.Small kwali iya cimma high-gudun Gudun smoothly.

2.Externally bonded type, šaukuwa rami, vent-type kuma iya zama barga, smoothly tsaya da takarda akwatin.

Sashen Aiki:

1.Configure launi LCD tabawa, za ka iya nuna wani iri-iri na ƙararrawa bayanai da aiki bayanai.

2.Achieve remote control.

VII.Kayan aikin watsawa

Babban kayan tuƙi

1), ta 20CrMnTi gami karfe, carburizing da nika gears.

2), daidaitattun guda shida (mai kama da) tare da akwatin gearbox mai santsi aiki, ƙaramin amo, taurin HRC58-62, tsawon rai, wanda ba ƙasa da shekaru 10 na lalacewa da tsagewa ba, na iya cimma alamun bugu na dogon lokaci.

2.Zben haɗi

1), Za'a iya haɗa zoben haɗin kyauta, ana iya haɗa shi da shaft da kayan aiki, yin amfani da babban juzu'i ba zai rataya ba, shigarwa da kiyayewa mafi dacewa, yana ba injin damar fitar da madaidaicin tsayi na dogon lokaci don tabbatar da rajistar bugu.

VIII.Babban sigogi na fasaha