SAIOB-Vacuum tsotsa Flexo Printing & Slotting &Die yankan & Manna a Layi
| Suna | Adadin |
| Ƙungiyar Ciyarwa (Mai ciyar da Jagora) | 1 |
| Naúrar bugawa (Ceramic anilox roller+ Blade) | 4 |
| Naúrar Slotting (Shaft na biyu) | 1 |
| Mutu yankan naúrar | 1 |
| Naúrar manne ta atomatik | 1 |
SAIOB-Vacuum tsotsa Flexo Printing & Slotting & mutu yankan & manne a layi
(Tsarin aiki da sigogi na fasaha)
Naúrar aiki mai sarrafa kwamfuta
1. Injin yana ɗaukar sarrafa kwamfuta, tare da direban servo na Japan.
2. Kowane ɗayan yana sanye da HMI touchscreen tare da aiki mai sauƙi, daidaitaccen daidaitawa da auto sifili.
3. Aikin žwažwalwar ajiya: lokacin shigar da madaidaicin bayanai ana ajiye shi ta atomatik don amfani na gaba.9999 aikin ƙwaƙwalwa.
4. Ana iya daidaita bayanai daban-daban, ba tare da amfani da aikin oda ba.Mai aiki zai iya gudanar da bayanan shigar da kai ta atomatik ta amfani da tsarin saitin akwatin guda.Za a iya shigar da tsayi, faɗi da tsayin akwatin kuma ramin ramin zai saita ta atomatik
5. Ana iya daidaita na'ura da kanta sannan kuma sabunta sabbin bayanai lokacin da yake nunawa yana bawa mai aiki damar ganin kuskuren na'urar yana aiki.
6. Ajiyayyen tsarin idan akwai asarar ƙwaƙwalwar ajiya.Ana iya dawo da bayanai cikin sauƙi.
7. Idan ana buƙatar buɗe na'ura yayin aiki, a rufe na'urar za ta atomatik, dawo da matsayinta na asali.
8. Atomatik anilox dagawa don ajiye ba dole ba wanka up.
9. Babban allon motar yana nuna saurin gudu, ciyarwa, gudu
10. Babban allon yana nuna tsarin tsari, kuma lokacin da aka samar da ainihin lamba, ciyarwar ta tsaya ta atomatik kuma anilox yana ɗauka ta atomatik daga farantin.
11. Saitunan kwali suna samuwa.
12. Duk masu girma dabam suna bayyane.
13. Haɓaka software na shekaru uku kyauta.
Ƙungiyar ciyarwa ta yi amfani da fasahar ciyarwar jagorar JC, wanda ya dace da kowane nau'i na corrugated.
Ciyar da abin nadi mai motsi 4 servo Motors, ba tare da kuskuren watsa injin ba.
Za a iya daidaita matsa lamba na iska gwargwadon girman takarda.
Dual Upper Rubber Feed abin nadi tare da diamita 147.6mm
Dual ƙananan ƙarfe mai ƙarfi chome abin nadi tare da diamita 157.45mm
Daidaita mota tare da nunin dijital (0-12mm)
Sanye take da tarkacen tsotsa da cire ƙura.Wannan yana kawar da mafi yawan ƙura a saman bugu, don haka inganta ingancin bugawa.
Tare da wannan tsarin tsotsa, an rage lalacewa ga takaddun corrugated kuma duk da ƙananan canje-canje a cikin kauri na allo, ingancin bugawa ba ya tasiri.
Naúrar ciyarwa tana da cikakken daidaitacce duka da hannu, ta hanyar motsa jiki da kuma tare da sarrafa kwamfuta na CNC.
Sifili ta atomatik yana ba da damar injin buɗewa, yin gyare-gyare, rufewa da saita baya zuwa matsayi sifili, don haka adana lokacin mai aiki.
Duk rukunin bugu ana sarrafa su tare da gyaggyaran fuska masu kama da juna don gudanar da shuru mai santsi
Canja wurin injin don tabbatar da daidaiton bugu zuwa + -0.5mm.
A waje diamita 393.97 (dauke da bugu farantin diamita ne 408.37mm)
Daidaitaccen ma'auni mai ƙarfi da ƙarfi, aiki mai santsi.
Ƙasa ƙasa tare da plating mai wuyar chrome.
Haɗe-haɗen sitiriyo ta tsarin saurin kulle ratchet.
Silinda na sitiriyo na iya motsa shi ta hanyar ƙafar ƙafar ma'aikaci don saiti.
1. Diamita na waje shine 172.2mm
2. Karfe surface nika, wuya Chrome plating.
3. Daidaita daidaitawa da aiki mai santsi.
4. An saita daidaitawar nip ɗin bugawa tare da kwamfuta da sarrafa dijital na lantarki.
1. Diamita na waje shine 236.18mm.
2. Tushen karfe tare da suturar yumbu.
3. Laser kwarzana zuwa takamaiman abokin ciniki.
4. Saurin canji mai sauri don kulawa mai dacewa
1.The m diamita ne 211mm
2.Steel mai rufi tare da lalata resistant roba
3.Ground da kambi
5. Gidan da aka keɓe na musamman na aluminum, wanda zai iya ajiyewa har zuwa 20% na ɓarna tawada.
6. Layi tare da PTFE kore Layer, wanda yake da sauƙi don tsaftacewa kuma ba tare da tsayawa ba.
7. Yin amfani da tsarin anilox mai saurin canzawa yana samuwa azaman zaɓi.
1. Planetary gear tare da 360 digiri daidaitacce
2. Matsayi na gefe yana daidaitawa ta hanyar lantarki ta hanyar kula da allon taɓawa na PLC, zuwa nesa na 20mm, tare da daidaitawar micro har zuwa 0.10mm.
3. Daidaitawar kewayawa ta hanyar allon taɓawa ta PLC tare da motsi360
4. Micro daidaitawa ta hanyar inverter for lafiya-tuning na har zuwa 0.10mm
1. Pneumatic diaphragm famfo yana samar da kwanciyar hankali tawada, aiki mai sauƙi da kulawa.
2. Ƙarancin tawada gargadi.
3. Tawada don kawar da datti.
1. Shaft diamita 154mm, mai wuya chrome plated.
2. Ana daidaita matsa lamba ta hanyar lantarki daga 0-12mm kuma ana nunawa ta hanyar nunin dijital.
1. Shaft diamita na 174mm wuya chrome plated.
2. Nisa na ramin wuka shine 7mm.
3. Wukake suna da taurin karfe, ƙasa mara kyau da kuma serrated.
4. Babban madaidaicin wuka mai tsaga guda biyu.
5. An saita tashar ramin ta hanyar allon taɓawa na PLC tare da ƙwaƙwalwar oda 1000.
Mai biya diyya
1. Planetary gear compensator, 360 digiri reversing daidaitawa.
2. Lokacin Slotting, wuka na gaba da baya suna amfani da PLC, sarrafa allon taɓawa da gyare-gyaren dijital na dijital 360.
Zaɓin kayan aikin rami na hannu
1. Tare da shugabannin aluminum da nau'i biyu na kayan aikin da aka yanke (nisa 110).
Sashin bushewar infrared (zaɓi)
1. Vacuum na'urar bushewa taimako;mai zaman kansa servo drive.
2. Cikakken dabaran injin karin watsawa.
3. Daidaitaccen zafi bisa ga girman takarda.
4. Dagawa iya canja wurin tebur.
Sashin Yanke-Yanke (saiti ɗaya)
Die Silinda da gibin anvil ana iya daidaita shi ta hanyar lantarki tare da nuni na dijital.
Ayyukan Aiki
1. Mutuwar silinda da maƙarƙashiya, lokacin da ba a aiki ba, ana buɗe su ta atomatik don rage tasirin injin da tsawaita rayuwar urethane.
2. Die Silinda yana da daidaitacce a kwance na 10mm.
3. Anvil cylinder an haɗa shi da aikin farauta ta atomatik har zuwa 30mm, wanda ke rarraba a ko'ina kuma yana haɓaka rayuwa.
4. Na'urar tana sanye take da servo driven anvil synchronization don taimakawa inganta daidaito tare da sawa anvils.
Mutu Silinda
1. A mutu Silinda ne da za a shawarci dangane da form
2. Alloy tsarin karfe tare da wuya chrome farantin.
3. Die kayyade dunƙule ramukan suna sarari kamar haka axial 100mm, radial 18mm.
4. Die abun yanka tsawo 23.8mm.
5. Kauri mai yankan itace: 16mm (allon takarda mai launi uku)
13mm (allon takarda guda biyar)
Anvil Silinda
1. Uretane Anvil Silinda
2. Alloy tsarin karfe tare da wuya chrome farantin.
3. Uretane kauri na 10mm (diamita 457.6mm) Nisa 250mm (8 miliyan yanke rayuwa)
Babban Jaka
1. bel mai tsotsa
2. Inverter kora don sarrafa daidaiton rata
3. Saurin saurin canzawa don bel na hagu da dama don mafi girman daidaiton ninki.
4. Motoci saitin hannu
Counter Ejector
1. Top loading zane don santsi high gudun aiki da sifili hadarin lokacin da gudu waje manne gwiwa ko SRP aiki
2. Servo kore sake zagayowar
3. Madaidaicin ƙidaya
Babban jirgin kasa na watsa kaya
1. Yi amfani da ƙasan 20CrMnTi, ƙarfe mai ƙarfe mai ƙarfi
2. HRC 58-62 Taurin yana ba da tsawon rai (har zuwa shekaru 10 tare da ƙarancin lalacewa)
3. Maɓallin haɗin kyauta don daidaito na dogon lokaci
4. Dual gear ooil famfo tare da multipoint fesa aikace-aikace
| Ƙayyadaddun bayanai | 2500 x 1200 |
| Matsakaicin gudun (min) | 280 takarda20 daure |
| Matsakaicin Girman Ciyarwa (mm) | 2500 x 1170 |
| Tsallake girman Feeder (mm) | 2500 x 1400 |
| Girman Ciyar Min (mm) | 650 x 450 |
| Matsakaicin Wurin bugawa (mm) | 2450 x 1120 |
| Kauri na sitiriyo (mm) | 7.2mm |
| Panels (mm) | 140x140x140x140240x80x240x80 |
| Max Die Cutter Girman (mm) | 2400 x 1120 |
| Kaurin takardar (mm) | 2-10 mm |
Adadin Ƙididdiga Suna
- Babban Mota (CDQC) 40KW 1
- Rarraba Mai Ciyarwa 0.1KW 1
- The Forward Roller 0.1KW 1
- Tailgate (China) 0.12KW 1/30 1
- Motsawar Ciyar (Taiwan) 0.75KW 1/71 2
- Hagu da Dama (China) 0.25KW 1/29 2
- Fans (China) 5.5KW 2
Na'urar bugawa
- Gyaran Roba (Taiwan) 0.4KW 1
- Anilox Lift (Taiwan) 0.2KW 1
- Aikin Anilox (Taiwan) 0.4KW 1
- Motsi na Raka'a (Taiwan) 0.4KW 1
- Aikin Nadi na Rubber (Taiwan) 0.75KW 1
- Modulation na Mataki (Taiwan) 0.37KW 1/20 1
- Teburin Dago (Taiwan) 0.37KW 1/30 1
- Tensile (Taiwan) 0.37KW 1/50 1
- Fans (China) 5.5KW 1
Ƙungiyar Slotter
- Canjin Mataki (China) 0.37KW 1/20 2
- Farantin Jagora Mai Rago (China) 0.55KW 4
- Matsar da Motar (Taiwan) 0.4KW 1
- Mai Canjawa 0.1KW 2
Ƙungiyar Cutter
- Die Lifting (Taiwan) 0.2KW 1
- Mutu Yankan Sharar (Taiwan) 0.4KW 1
- Modulation na Mataki (Taiwan) 0.37KW 1/20 1
- Tensile Tare da (Taiwan) 0.37KW 1/50 1
- Yanke tsutsa (China) 1/100 1
- Mai Canza Roller (Taiwan) 0.1KW 1
Sashin sufuri
- Babban Motoci (Siemens) 0.75KW 1
- Side Motor (Taiwan) 0.4KW 4
- Zaɓi Arm (Taiwan) 0.4KW 2
- Kasa da Cire Motar (Taiwan) 0.4KW 2
Sashin nadawa
- Motar Motar Man (Taiwan) 0.4KW 1
- Motsin Man (Taiwan) 0.4KW 1
- Fan (China) 2.2KW 4
- Fan Takarda (China) 3KW 1
- Motar Layin (China) 0.4KW 2
- Kasa da Cire Motar (Taiwan) 1.5KW 2
- Gudanar da Motoci (Taiwan) 37KW 2
- Motar Watsawa 0.37KW 1
Fitar Unit
- Motar watsa Gear (Taiwan) 0.75KW 2
- Motar Bayar da Takarda (Taiwan) 1.5KW 2
- Rear Baffle (Taiwan) 0.55KW 1
- Teburin Karɓa (Taiwan) 0.37KW 1
- Rear Baffle (Taiwan) 0.55KW 1
- Teburin Karɓa (Taiwan) 0.37KW 1
- Motar Mai Latsawa (Taiwan) 0.37KW 2
- Takarda Servo Motor (Japan) 3KW 1
- Takarda Mai Taimakawa Servo 5KW 2
Sauran Bayani
Adadin Asalin Suna
- Bayar da NSK, C&U Duk
- Servo Lead Edge Feeder Japan (Omron) Duk
- Ceramic Anilox Roller Haili, GuangTai All
- AC Contactor, Thermal Relay Siemens Duk
- PLC Japan (Omron) Duk
- Encoder Italiya (ELTRA) Duk
- Touch Screen Sweden (Beijer) Duk
- Ring Connection Kyauta China Duk
- Tawada Pump China Duk
- Inverter Japan (Yaskawa) Duk
- Solenoid Valve Taiwan (Airtac) Duk
- Wuka Taiwan(Jeefeng) Duk
- Murfin Anvil Taiwan(Maxdura) Duk
