GUOWANG R130Y AUTOMATIC HOTO-FOIL TATTAUNAWA NASHI

Takaitaccen Bayani:

Gefen gefe da na gaba suna tare da ingantattun na'urori masu auna firikwensin gani, waɗanda ke iya gano launin duhu da takardar filastik.Ana iya daidaita hankali.
Na'urori masu auna firikwensin gani tare da tsarin tsayawa ta atomatik akan teburin ciyarwa suna ba ku damar haɓaka tsarin kulawa- don ingantaccen kulawar inganci akan duk faɗin takardar da matsin takarda.
Ƙungiyar aiki don ɓangaren ciyarwa yana da sauƙi don sarrafa tsarin ciyarwa tare da nunin LED.
Dabarun sarrafa tuƙi don babban tari da tari na taimako
PLC da cam na lantarki don sarrafa lokaci
Na'urar hana cikas na iya guje wa lalacewar injin.
Japan Nitta isar da bel don ciyarwa kuma saurin daidaitacce ne


Cikakken Bayani

Sauran bayanin samfurin

Bayanin Samfura

Bayanin Samfura

20 yankin dumama

3 Tsayi mai tsayi, 2 mai jujjuya foil shaft

Akwai HOLOGRAM

5000 Sheets/H

Max.450T matsa lamba

Lissafin ƙididdiga ta atomatik ta kwamfuta mai hankali

Ma'aunin Fasaha

C130Y

Ƙimar Fasaha

C80Y2

RANA'AR AZZAFI

Matsin lamba ta hanyar YASAKAWA Servo System.
Max.Matsa lamba 150T.
Biyu da tsare tsare tsare mai raba abin hurawa don girma girma stamping.

C80Y3

ZUMUNCI

20 Wuraren Wuta
Rarrabe sarrafa zafin jiki ta servo tare da ± 1℃ haƙuri.

C80Y4

CIN GINDI

3 Longitudinal (Max. 6), 2 Transversal foil shaft by YASAKAWA servo control
Max.Diamita mai tsayi 250mm
Foil break detector
HOLOGRAM na zaɓi

C80Y5

MAI KYAUTA

Ana iya fitar da mariƙin foil don sauƙaƙan sauyi

C80Y6

TSARIN KWAMFUTA

2 Led tabawa a kan na'ura, 1 raba Led tabawa allo don sarrafa tsare-stamping

Kwamfuta mai hankali za ta lissafta kuma ta ba da mafi kyawun bayani don tsari daban-daban ta ko da mataki ko tsalle mataki

C80Y7

COMPACT FOIL REWINDER

Karamin foil rewinder daidai yake da na'ura

Siffofin

Sashen ciyarwa
Babban mai ciyar da abinci mai inganci wanda aka yi a kasar Sin tare da tsotsa 4 don ɗaga takarda da masu tsotsa 4 don isar da takarda yana tabbatar da kwanciyar hankali da takardar ciyar da sauri.Tsayi da kusurwar tsotsa suna da sauƙin daidaitawa don kiyaye zanen gado cikakke.
Injini mai gano takarda biyu, na'urar mai ɗaukar takarda, daidaitacce mai busa iska yana tabbatar da canja wurin zanen gado zuwa teburin bel a hankali da kuma daidai.
Vacuum famfo daga Jamus Becker ne.
Ana iya daidaita tari na gefe ta mota don ingantaccen ciyarwar takarda.
Pre-piling na'urar sa ba tsayawa ciyar tare da babban tari (Max. tari tsawo ne har zuwa 1600mm).
Ana iya samar da ingantattun tudu akan pallets waɗanda ke gudana akan dogo don riga-kafi.Wannan yana ba da gudummawa mai mahimmanci ga samarwa mai santsi kuma yana barin mai aiki ya motsa tarin da aka shirya don ciyarwa daidai da dacewa.
Matsayi guda ɗaya na aikin pneumatic mai sarrafa injin yana tabbatar da takardar farko bayan kowane sake kunna na'ura koyaushe ana ciyar da shi zuwa shimfidar gaba don sauƙi, adana lokaci da tanadin kayan aiki.
Za'a iya canza shimfiɗar gefen kai tsaye tsakanin yanayin ja da turawa a ɓangarorin biyu na injin ta hanyar jujjuya ƙugiya ba tare da ƙara ko cire sassa ba.Wannan yana ba da sassauci don sarrafa abubuwa da yawa: ba tare da la'akari da ko alamun rajistar suna hagu ko dama na takardar ba.
Gefen gefe da na gaba suna tare da ingantattun na'urori masu auna firikwensin gani, waɗanda ke iya gano launin duhu da takardar filastik.Ana iya daidaita hankali.
Na'urori masu auna firikwensin gani tare da tsarin tsayawa ta atomatik akan teburin ciyarwa suna ba ku damar haɓaka tsarin kulawa- don ingantaccen kulawar inganci akan duk faɗin takardar da matsin takarda.
Ƙungiyar aiki don ɓangaren ciyarwa yana da sauƙi don sarrafa tsarin ciyarwa tare da nunin LED.
Dabarun sarrafa tuƙi don babban tari da tari na taimako
PLC da cam na lantarki don sarrafa lokaci
Na'urar hana cikas na iya guje wa lalacewar injin.
Japan Nitta isar da bel don ciyarwa kuma saurin daidaitacce ne

Rage-yanke
Tsarin kulle pneumatic yana ba da sauƙin kullewa da sakin yanke chase da yankan faranti.
Pneumatic dagawa sabon farantin don sauƙi zamewa ciki da waje.
Tsarin tsakiyar layi akan neman yanke-yanke tare da daidaitawar micro-versal yana tabbatar da ingantaccen rajista wanda ke haifar da canjin aiki cikin sauri.
Daidaitaccen matsayi na Yanke chase ana sarrafawa ta ingantattun na'urori masu auna firikwensin gani tare da na'urar kullewa ta atomatik
Yanke chase juya na'urar
Babban motar Siemens wanda Schneider inverter ke sarrafawa.
Micro-daidaitacce na yankan karfi (daidaicin matsa lamba na iya zama har zuwa 0.01mm, Max.matsa lamba mai yanke mutuwa na iya zama har zuwa ton 300) ta kayan aikin tsutsa wanda motar servo ke motsawa kuma ana sarrafa shi cikin sauƙi ta allon taɓawa inch 15.
Crankshaft an yi shi da karfe 40Cr.
HT300 ductile baƙin ƙarfe ga inji Frames da platens
Saitunan sanduna 7 na gripper tare da grippers waɗanda aka yi da ƙarancin nauyi da ɗorewa na aluminium tare da ƙwanƙwasa mai ƙarfi da ƙarancin anodized suna tabbatar da daidaiton rajistar takarda.
Babban mashaya gripper daga Japan tare da tsawon rai
Matsakaicin madaidaicin madaidaicin madaidaicin madaidaicin buƙatun babu buƙatar sarari don diyya don tabbatar da ingantacciyar rijistar takarda
Yankan faranti na kauri daban-daban (1pc na 1mm, 1 pc na 3mm, 1 pc na 4mm) don sauƙin canjin aiki
High quality Renold sarkar daga Ingila tare da pre-extended magani tabbatar da kwanciyar hankali da daidaito a cikin dogon gudu.
Babban matsa lamba index drive tsarin for gripper sakawa mashaya
Na'urar kariya ta wuce gona da iri tare da madaidaicin juzu'i yana haifar da mafi girman matakin tsaro ga mai aiki da na'ura.
Tsarin lubrication na atomatik da tsarin sanyaya don babban tuƙi da lubrication ta atomatik don babban sarkar.

Rukunin Tambarin Foil
Mai sarrafa na'ura mai iya sarrafa shirye-shirye daban-daban (saiti 3 a tsayin tsayi da saiti 2 a cikin madaidaiciyar hanya) ta YASKAWA servo Motors
Tsawon tsari cikakken tsarin ciyarwar foil don yin hatimi a cikin shugabanci guda 2 a lokaci guda wanda ke taimakawa sosai wajen adana foils da kuma lokacin canza foils.
20 daban-daban sarrafa dumama zones, ta amfani da intubation dumama tsarin, tare da haƙuri a cikin ± 1C
Saitin ƙarfe 1 na ductile baƙin ƙarfe chase da na'urar kulle don ya mutu
Na'urar lokacin zama don babban yanki tambari
2 direction iska hura na'urar rabuwa
Tsarin goga yana cire foil ɗin da aka yi amfani da shi daga gefen injin, inda za'a iya tattarawa da zubar da shi.
Na'urori masu auna firikwensin gani suna gano karyewar foil.
WFR-280 na zaɓi na zaɓi don zubar da foil ɗin da aka yi amfani da shi, yana ba da damar raunata tsare-tsare a kan ramukan masu zaman kansu guda shida a cikin keɓantaccen tsari.


  • Na baya:
  • Na gaba:

  • Sashin bayarwa

    Daidaitaccen buroshin birki wanda motar AC ke sarrafawa yana taimakawa don sauke takarda daga gripper da tara takarda cikin sauri mafi girma da daidaitaccen jeri.
    Tsayin isarwa ya kai mm 1350.
    Na'urorin lantarki da ke hana hawan sama da saukowa na tarin takardar isarwa
    Ana iya ƙidaya tari ta hanyar firikwensin gani (misali) kuma ana iya haɗa naúrar tare da na'ura don shigar da zamewar takarda a cikin tari (na zaɓi).Zai sauƙaƙa cire ɓangarori da tattara su cikin akwati.
    Ana iya daidaita na'urar gabaɗaya ta 10.4 inch duban taɓawa a gefen baya
    An saita tarakin isarwa na taimako don isarwa mara tsayawa.

    Kayan Wutar Lantarki

    Masu gano na'urorin lantarki, micro switched da sel na hoto wanda PLC ke sarrafawa akan injin gabaɗaya
    Canjin kyamarar cam ɗin lantarki da mai rikodin
    Duk manyan ayyuka ana iya yin su ta 15 da 10.4 inch touch Monitor.
    PILZ aminci gudun ba da sanda azaman ma'auni yana tabbatar da mafi girman ma'aunin aminci.
    Maɓallin kulle-kulle na ciki ya cika buƙatun CE.
    Yana aiki da sassan lantarki da suka haɗa da Moeller, Omron, Relay Schneider, AC contactor da mai karya iska don tabbatar da kwanciyar hankali a cikin dogon lokaci.
    Nuni kuskure ta atomatik da bincikar kansa.

    Wasu

    Aiki dandali tare da dumama mai kula;1 saitin kayan aiki akwatin da manual aiki.

    Ishigarwa Data

    C80Y8

    Samfuran Aikace-aikace

    C80Y9 C80Y10 C80Y11 C80Y12

    Takaddun shaida

    CE certificate for GW diecutters

    Ku rubuta sakonku anan ku aiko mana