Tanderu na al'ada
Tanderu na al'ada shine ba makawa a cikin layin sutura don yin aiki tare da na'ura mai ɗaukar hoto don rubutun tushe da bututun fenti.Hakanan madadin a cikin layin bugu tare da tawada na al'ada.
'An yi amfani da tanda na al'ada sosai a cikin sutura da bugawa don yawancin katogroies na gwangwani guda uku amma kuma mafi kyawun mafita ga gwangwani kifi, iyakoki, ƙarewa..
Ƙarin ceton makamashi na tanda na yau da kullum ana haɓaka ta hanyar fasaha ta haƙƙin mallaka, wanda ya himmatu ga buƙatun duniya masu tasowa a ƙarƙashin rikicin makamashi na yanzu da motsin yanayin yanayi a zaman lafiya.
Don ayyana samfuran da kuka fi so, da fatan za a danna'MAFITA'don nemo aikace-aikacen da aka yi niyya.Don'yi shakkar buɗa tambayoyinku ta mail:vente@eureka-machinery.com
Mara jurewa, dabaran mara kura
| Sunan Sashe | Alamar | Ƙasar Asalin | Magana |
| Sarrafa Servo | SCHEINDER | Jamus | |
| Servo motor | SCHNEIDER | Jamus | |
| Relay | SCHNEIDER | Jamus | |
| Main PLC | SCHEIDER | Jamus | |
| Iyakance Sauyawa | Omron | Japan | |
| Encoder | Omron | Japan | |
| Burner | RIELLO | Italiya | Ikon daidaitawa |
| Thermo Mita | Honeywell | Amurka |
| 30Mita TANA | ||
| Max.gudu | 6000 (sheets/h) | |
| Max.tanda aiki temp. | 230 ℃ | |
| tsawon tanda | 30 m | |
| jimlar tsawon kayan aiki | 47.81m | |
| Lokaci don yin burodin zanen gado a yankin yin burodi | ||
| 1.Gudun zanen gado 4800 / h, mintuna 10 | ||
| 2.Gudun zanen gado 5100 / h, 9.4 mintuna | ||
| 3.Gudun zanen gado 5400/h, mintuna 8.9 | ||
| 4.Gudun zanen gado 6000/h, mintuna 8 | ||
| Max.girman takardar karfe | 1145×950mm | |
| Min.girman takardar karfe | 710×510mm | |
| Kauri na karfe takardar | 0.15-0.5mm | |
| Mai | LPG,NG, LANTARKI | |
| Yankin sanyaya | 6.96m ku | |
| Yawan dumama dakin | 2 | |
| Yankin sanyaya ƙarar shan iska | 50000m3/h | |
| Ƙarar fitarwar yankin sanyaya | 55000m3/h | |
| Samar da iska: bai wuce ba | 4500m3/h | |
| Ƙarar iska ta gaba | kimanin 10000 m3 / h | |
| Rear shaye iska ƙarar | kimanin 4000 m3 / h | |
| Jimlar yawan amfani da wutar lantarki | Kusan 63.1kw | |
| Tanderun Mita 33 | ||
| Max.gudu | 6000 (sheets/h) | |
| Max.tanda aiki temp. | 230 ℃ | |
| tsawon tanda | 33m ku | |
| jimlar tsawon kayan aiki | 50.81 m | |
| Lokaci don yin burodin zanen gado a yankin yin burodi | ||
| 1.Gudun zanen gado 4800/h, minti 11 | ||
| 2.Gudun zanen gado 5100/h, 10.3minti | ||
| 3.Gudun zanen gado 5400/h, minti 9.8 | ||
| 4.Gudun zanen gado 6000/h, minti 8.8 | ||
| Max.girman takardar karfe | 1145×950mm | |
| Min.girman takardar karfe | 710×510mm | |
| Kauri na karfe takardar | 0.15-0.5mm | |
| Mai | LPG,NG, LANTARKI | |
| Yankin sanyaya | 6.96m ku | |
| Yawan dumama dakin | 2 | |
| Yankin sanyaya ƙarar shan iska | 50000m3/h | |
| Ƙarar fitarwar yankin sanyaya | 55000m3/h | |
| Samar da iska: bai wuce ba | 4500m3/h | |
| Ƙarar iska ta gaba | kimanin 10000 m3 / h | |
| Rear shaye iska ƙarar | kimanin 4000 m3 / h | |
| Jimlar yawan amfani da wutar lantarki | Kusan 63.1kw | |
