Saukewa: FD-AFM450A
Tsarin PLC: OMRON PLC na Japan, allon taɓawa 10.4 inch
❖ Tsarin watsawa: Taiwan Yintai
❖ Abubuwan Wutar Lantarki: Faransanci SCHNEIDER
❖ Abubuwan Haihuwa: SMC na Jafananci
❖ Kayan Aikin Wutar Lantarki: SUNX na Jafananci
❖ Ultrasonic mai duba takarda biyu: KATO na Jafananci
❖ Conveyer Belt: Swiss HABASIT
❖ Servo Motor: Japan YASKAWA
❖ Rage Motoci: Taiwan Chenggbang
❖ Haɓaka: Jafananci NSK
❖ Tsarin manne: chromed Bakin karfe abin nadi, jan karfe gear famfo
❖ Vacuum famfo: ORION Jafananci
(1) Bayarwa ta atomatik da manne don takarda
(2) Isarwa ta atomatik, sanyawa da tabo don kwali.
(3) Nadawa gefe hudu da kafawa a lokaci guda (tare da trimmer na atomatik)
(4) Duk inji rungumi dabi'ar bude-type yi a cikin zane.Ana iya ganin duk motsi a fili.Ana iya magance matsalolin cikin sauƙi.
(5)Tare da abokantakar Man-Machine aiki dubawa, duk matsaloli za a nuna a kan kwamfuta.
(6) An tsara murfin gilashin gilashi bisa ga ka'idodin CE ta Turai, wanda ke nuna aminci da ɗan adam.
Interface Mai Sada Zumunta
| Mai yin harka ta atomatik | Saukewa: FD-AFM450A | |
| 1 | Girman takarda (A×B) | MIN: 130×230mm girman: 480×830mm |
| 2 | Kaurin takarda | 100-200 g/m2 |
| 3 | Kaurin kwali (T) | 1 ~ 3mm |
| 4 | Girman samfurin da aka gama (W×L) | MIN: 100×200mm girman: 450×800mm |
| 5 | Kashin baya(S) | 10 mm |
| 6 | Girman takarda mai ninke(R) | 10 ~ 18mm |
| 7 | Matsakaicin adadin kwali | 6 guda |
| 8 | Daidaitawa | ± 0.50mm |
| 9 | Saurin samarwa | ≦25 zanen gado/min |
| 10 | Ƙarfin mota | 5kw/380v 3 lokaci |
| 11 | Samar da iska | 30L/min 0.6Mpa |
| 12 | Wutar lantarki | 6 kw |
| 13 | Nauyin inji | 3200kg |
Dangantakar da ta dace tsakanin ƙayyadaddun bayanai:
A(Min)≤W+2T+2R≤A(Max)
B(min)≤L+2T+2R≤B(Max)
❖ Akwatin Max.&min.masu girma dabam suna ƙarƙashin girman takarda da inganci.
❖ Gudun injin ya dogara da girman akwatunan
❖ Tsawon kwali: 220mm
❖ Takarda tsayin daka: 280mm
Girman tanki mai manne: 60L
❖ Lokacin aiki don ƙwararren mai aiki daga wannan samfur zuwa wani: mintuna 30
❖ taushi kashin baya: ≥0.3mm a kauri, 10-60mm a nisa, 0-450mm a tsawon
(1)Sashen Ciyarwa:
❖ Cikakken mai ciyar da huhu: gini mai sauƙi, aiki mai dacewa, ƙirar sabon labari, PLC sarrafawa, motsi daidai.
❖ Yana ɗaukar na'urar gano takarda biyu na ultrasonic don jigilar takarda
❖ Gyaran takarda yana tabbatar da cewa takardar ba za ta karkace ba bayan an manne ta
(2)Rukunin manne:
❖ Cikakken mai ciyar da huhu: gini mai sauƙi, aiki mai dacewa, ƙirar sabon labari, PLC sarrafawa, motsi daidai.
❖ Yana ɗaukar na'urar gano takarda biyu na ultrasonic don jigilar takarda
❖ Gyaran takarda yana tabbatar da cewa takardar ba za ta karkace ba bayan an manne ta
❖ Tankin manna na iya manne ta atomatik a wurare dabam dabam, haɗuwa kuma koyaushe zafi da tacewa.Tare da bawul mai saurin canzawa, zai ɗauki mintuna 3-5 kawai don mai amfani don tsaftace silinda mai gluing.
❖ Mitar danko. (Na zaɓi)
(3) Sashin jigilar Allo
❖ Yana ɗaukar madaidaicin kwali wanda ba ya tsayawa ƙasa, wanda ke inganta saurin samarwa.
❖ Na'urar gano mota ta kwali: injin zai tsaya yana ƙararrawa yayin da ba shi da guda ɗaya ko da yawa na kwali wajen jigilar kaya.
❖ Na'urar kashin baya mai laushi, ciyarwa ta atomatik da yanke kashin baya mai laushi.(na zaɓi)
(4) Naúrar wuri-tabo
❖ Yana ɗaukar motar servo don fitar da mai ɗaukar kwali da sel masu ingancin hoto don sanya kwali.
❖ Cikakkiyar fanka tsotsa mai cike da ƙarfi a ƙarƙashin bel ɗin isarwa na iya tsotse takarda a tsaye a kan bel ɗin mai.
❖ Isar da kwali yana ɗaukar motar servo
❖ Servo da na'urar sakawa firikwensin yana inganta daidaitattun daidaito.(na zaɓi)
❖ The PLC sarrafa kan-motsi na kan layi
❖ Silinda da aka riga aka latsa akan bel mai ɗaukar hoto zai iya tabbatar da cewa an hange kwali da takarda kafin a naɗe gefensu.
(5) Hudu-bakinadawa naúrar
❖ Yana ɗaukar bel ɗin gindin fim don ninka ɗagawa da gefen dama.
Trimmer zai ba ku sakamakon nadawa sauti
❖ Yana ɗaukar na'urar datti don datsa sasanninta.
❖ Yana ɗaukar na'ura mai ɗaukar hoto zuwa-da-daga ga gefen gaba da baya da mariƙin hannun mutum don ninkewa.
❖ Multi-Layer rollers danna tabbatar da ingancin samfuran ƙarshen ba tare da kumfa ba.
1. Abubuwan Bukatun Kasa
Ya kamata a ɗora na'urar a kan ƙasa mai laushi da ƙaƙƙarfan wanda zai iya tabbatar da cewa yana da isasshen nauyin kaya (kimanin 300kg / m).2).Ya kamata a kewaye da injin ya adana isasshen sarari don aiki da kulawa.
2. Girman injin
3.Halayen yanayi
Zazzabi: Yanayin zafin jiki ya kamata a kiyaye a kusa da 18-24 ° C (Ya kamata a sanya kwandishan a lokacin rani)
❖ Humidity: yakamata a sarrafa zafi a kusa da 50-60%
❖ Haske: Game da 300LUX wanda zai iya tabbatar da kayan aikin hoto na iya aiki akai-akai.
❖ Nisantar iskar gas, sinadarai, acidic, alkali, fashewa da abubuwa masu kumburi.
❖ Don kiyaye injin daga girgizawa da girgizawa da zama gida ga na'urar lantarki tare da filin lantarki mai saurin mitoci.
❖ Don kiyaye shi daga shiga rana kai tsaye.
❖ Don kiyaye shi daga hura shi kai tsaye da fan
4. Abubuwan Bukatun Kayayyakin
❖ Yakamata a ajiye takarda da kwali akai-akai.
❖ The takarda laminating ya kamata a sarrafa electro-statically a cikin biyu-gefe.
❖ Ya kamata a sarrafa madaidaicin yankan kwali a ƙarƙashin ± 0.30mm (Shawarwari: ta amfani da abin yanka kwali KL1300 da s
5.Launi na takarda da aka liƙa yana kama da ko daidai da na bel mai ɗaukar hoto (baƙar fata), kuma wani launi na tef ɗin ya kamata a makale a kan bel ɗin. launi tef: fari)
6.The wutar lantarki: 3 lokaci, 380V / 50Hz, wani lokacin, zai iya zama 220V / 50Hz 415V / Hz bisa ga ainihin yanayi a kasashe daban-daban.
7 .Tsarin iska: 5-8 yanayi (matsi na yanayi), 30L / min.Rashin ingancin iska zai fi haifar da matsala ga injinan.Zai rage da gaske da aminci da rayuwa na tsarin pneumatic, wanda zai haifar da asara mai yawa ko lalacewa wanda zai iya wuce kima da kulawa da irin wannan tsarin.Don haka dole ne a keɓe shi ta hanyar fasaha tare da ingantaccen tsarin samar da iska da abubuwan su.Wadannan su ne hanyoyin tsarkake iska kawai don tunani:
| 1 | Kwamfutar iska | ||
| 3 | Tankin iska | 4 | Manyan bututu tace |
| 5 | Mai sanyaya salon bushewa | 6 | Mai raba hazo |
❖ Na'urar kwampreso ta iska ba daidai ba ce ta wannan injin.Ba a samar da wannan na'ura tare da kwampreso na iska ba.Abokan ciniki ke siye shi da kansa (Ikon kwampreso na iska: 11kw, ƙimar iska: 1.5m3/minti).
❖ Aikin tankin iska (girman 1m3, matsa lamba: 0.8MPa):
a.Don wani ɓangare na kwantar da iska tare da zafin jiki mafi girma da ke fitowa daga injin damfara ta cikin tankin iska.
b.Don daidaita matsin da abubuwan da ke kunnawa a baya ke amfani da su don abubuwan da ke cikin pneumatic.
❖ Babban tace bututun shine a cire tazarar mai da ruwa da kura da sauransu a cikin iskar da aka matse domin inganta aikin na'urar bushewa a mataki na gaba da tsawaita rayuwar tacewa da bushewa a baya. .
❖ Coolant style drier shine tacewa da raba ruwa ko danshi a cikin iskar da aka matse da na'urar sanyaya, mai raba ruwan mai, tankin iska da kuma babban tacewa bayan an cire iskan da aka matsa.
❖ Mai raba hazo shine tacewa da raba ruwa ko damshin da ke cikin iskar da na'urar bushewa ta sarrafa.
8.Mutane: don kare lafiyar ma'aikaci da na'ura, da kuma cikakken cin gajiyar aikin na'ura da rage matsalolin da tsawaita rayuwarsa, 2-3 ƙwararrun ƙwararrun ƙwararrun masana'antu waɗanda ke iya aiki da na'ura ya kamata a sanya su. aiki da inji.
9.Auxiliary kayan
Manna: manne dabba (jelly gel, Shili gel), ƙayyadaddun: babban salon bushewa mai sauri
Na zaɓi FD-KL1300A Mai yanka kwali
(Kayan Agaji 1)
An fi amfani dashi don yankan kayan kamar katako, kwali na masana'antu, kwali mai launin toka, da sauransu.
Wajibi ne don littattafai masu wuya, kwalaye, da dai sauransu.
1. Ciyar da babban kwali da hannu da ƙaramin kwali ta atomatik.Servo sarrafawa da saitin ta hanyar allon taɓawa.
2. Silinda pneumatic suna sarrafa matsa lamba, sauƙin daidaita girman kwali.
3. An tsara murfin aminci bisa ga ma'aunin CE ta Turai.
4. Yi amfani da tsarin mai da hankali, mai sauƙin kulawa.
5. Babban tsarin yana yin ƙarfe na simintin gyare-gyare, barga ba tare da lankwasawa ba.
6. Mai murƙushewa yana yanke sharar gida kanana kuma ya fitar da su da bel mai ɗaukar kaya.
7. Ƙarshen samar da kayan aiki: tare da bel mai ɗaukar mita 2 don tattarawa.
| Samfura | Saukewa: FD-KL1300A |
| Faɗin kwali | W≤1300mm, L≤1300mmW1=100-800mm, W2≥55mm |
| Kaurin kwali | 1-3 mm |
| Saurin samarwa | ≤60m/min |
| Daidaitawa | + - 0.1 mm |
| Ƙarfin mota | 4kw/380v 3 lokaci |
| Samar da iska | 0.1L/min 0.6Mpa |
| Nauyin inji | 1300kg |
| Girman inji | L3260×W1815×H1225mm |
Lura: Ba mu samar da kwampreso na iska.
Mai ba da abinci ta atomatik
Yana ɗaukar feeder ɗin ƙasa wanda ke ciyar da kayan ba tare da tsayawa ba.Akwai don ciyar da ƙananan girman allo ta atomatik.
Servokuma Kwallon Kwando
Masu ciyarwa ana sarrafa su ta hanyar dunƙule ƙwallon ƙwallon ƙafa, injin servo ne ke motsa shi wanda ke inganta daidaitaccen daidai kuma yana sauƙaƙe daidaitawa.
8 saitina HighWukake masu inganci
Dauki alloy zagaye wukake wanda ke rage abrasion da inganta yankan yadda ya dace.Mai ɗorewa.
Saitin nesa na wuka ta atomatik
Ana iya saita nisa na layin yanke ta allon taɓawa.Bisa ga saitin, jagorar za ta motsa ta atomatik zuwa matsayi.Babu ma'auni da ake buƙata.
CE daidaitaccen murfin aminci
An tsara murfin aminci bisa ga ma'aunin CE wanda ke hana ɓarna da kyau kuma yana tabbatar da amincin mutum.
Sharar gida
Za a murkushe sharar ta atomatik kuma a tattara su yayin yanke babban takardar kwali.
Na'urar sarrafa matsa lamba na huhu
Ɗauki silinda na iska don sarrafa matsa lamba wanda ke rage buƙatar aiki don ma'aikata.
Kariyar tabawa
HMI abokantaka yana taimakawa daidaitawa cikin sauƙi da sauri.Tare da injin atomatik, ƙararrawa da saitin nesa na wuka, sauya harshe.
ZX450 Mai yankan kashin baya
(Kayan Agaji 2)
Kayan aiki ne na musamman a cikin littattafai masu wuya.An halin da kyau yi, sauki aiki, m incision, high daidaito da kuma yadda ya dace da dai sauransu Ana amfani da yanke kashin baya na hardcover littattafai.
1. The guda-guntu electromagnetic kama, barga aiki, sauki daidaita
2. Tsarin lubrication mai mahimmanci, mai sauƙin kulawa
3. bayyanarsa yana da kyau a cikin ƙira, murfin aminci daidai da ƙa'idar CE ta Turai
| Faɗin kwali | 450mm (max.) |
| Fadin kashin baya | 7-45 mm |
| Katinallon kauri | 1-3 mm |
| Yanke gudun | 180 sau / min |
| Ƙarfin mota | 1.1kw/380v 3 lokaci |
| Nauyin inji | 580kg |
| Girman inji | L1130×W1000×H1360mm |
